Kuna nan:
PVC Tsarin Isar da Haɗaɗɗiyya ta atomatik
Tambaya
| 1.Material mai shigowa | |
| Albarkatun kasa | HR,CR carbon karfe nada |
| Ƙarfin Ƙarfi | σb≤600Mpa |
| Ƙarfin Haɓaka | σs≤315Mpa |
| Tsari Nisa | 40 ~ 103 mm |
| OD na nada karfe | Max.Φ2000 mm |
| ID na nada karfe | Φ508 mm |
| Nauyin Karfe nada | Max.2.0 ton/nadi |
| Kaurin bango | Zagaye Bututu: 0.25-1.5mm |
| Square& Rectangle: 0.5-1.5mm | |
| Yanayin Tatsi | Gefen tsaga |
| Jurewa Kauri | Max.± 5% |
| Jurewa Nisa | ± 0.2mm |
| Tafi camber | Max.5mm/10m |
| Burr tsayi | ≤ (0.05 x T) mm (T - kauri mai kauri) |
| 2.Machine Capacity | |
| Nau'in: | PL-32Z Nau'in ERW Tube Mill |
| Hanyar Aiki | TBA ta Mai siye |
| Girman bututu | Bututu Zagaye: Φ 10~ % 32.8 mm * 0.5 ~ 2.0 mm |
| Square: 8 × 8 ~ 25.4 × 25.4 mm * 0.5 ~ 1.5 mm | |
| Rectangle: 10× 6 ~ 31.8 × 19.1 mm (a/b≤2:1) * 0.5 ~ 1.5 mm | |
| Saurin Zane | 30-90m/min |
| Adana tsiri | Tsaye keji |
| Canjin abin nadi | Canza abin nadi daga gefe |
| Babban direban injin niƙa | 1 saiti * DC 37KWX2 |
| Babban mitar yanayi mai ƙarfi | XGGP-100-0.4-HC |
| Matsi mirgina Na'urar | 2 inji mai kwakwalwa Rolls irin |
| Yankan Ganye | Zagi mai tashi mai zafi/ Sanyi mai tashi sama |
| Teburin Coveyor | 9m (Tsawon tebur ya dogara da Max.tsawon bututu = 6m) |
| Hanyar Tumbling | Gefe guda ɗaya ya ƙare tebur |
| 3.Yanayin aiki | |
| Tushen wutar lantarki | Ƙarfin wutar lantarki: AC 380V ± 5% x 50Hz ± 5% x 3PHControl ƙarfin lantarki: AC 220V ± 5% x 50Hz ± 5% x 1PHSolenoid bawul DC 24V |
| Matsalolin iska | 5 Bar ~ 8 Bar |
| Ruwan Danyen Ruwa | 1 Bar ~ 3 Bar |
| Ruwa & Emulsion Zazzabi | 30°C kasa |
| Girman Tafkunan Mai sanyaya Emulsion: | ≥ 20m3x 2sets (Tare da gilashin fiber sanyaya hasumiya≥RT30) |
| Emulsion sanyaya ruwa Gudun | ≥ 20 m3/Hr |
| Emulsion sanyaya ruwa daga | ≥ 30m (ikon famfo ≥AC4.0Kw*2sets) |
| Mai sanyaya ga HF welder | Mai sanyaya ruwan iska/Ruwa-ruwa mai sanyaya |
| Mai shaye-shaye axial fan don welded tururi | ≥ AC0.55Kw |
| Wurin shaye-shaye axial fan don welded tururi | ≥ AC4.0Kw |
4. Jerin injina
| Abu | Bayani | Qty |
| 1 | Semi auto BIYU-SHUGABAN UN-COILER-Mandrel fadada ta Pneumatic Silinda-Tare da Pneumatic disk birki | 1 saiti |
| 2 | STRIP-head Cutter & TIG BUTT WELDER STATION- Shearing-Head Shearing ta Pneumatic Silinda- bindigar walda mai sarrafa kansa ta hannu Saukewa: TIG-315A | 1 saiti |
| 3 | Tsaye keji- AC 2.2 Kw Ta tsarin sarrafa saurin inverter- nau'in keji na ciki, an daidaita nisa ta hanyar sarkar | 1 saiti |
| 4 | Babban tsarin sarrafa tuƙi na DC don Ƙirƙirar Sashe / Ƙimar Girmamawa-DC 37KWX2-Tare da DC iko majalisar | 1 saiti |
| 5 | Babban Injin PL-32Z | 1 saiti |
| Tube Forming Mill- Shigar Ciyarwa & Naúrar lallausan ƙasa- Yanki mai rushewa - Yankin wucewa | 1 saiti | |
| Yankin walda- Disk stye seeam jagorar tsayawa - Tsayar da abin nadi (nau'in nadi 2) - Naúrar scrafing a waje (2pcs kinves) - A tsaye kabu guga tsayawa | 1 saiti | |
| Sashin sanyaya ruwa Emulsion: (1500mm) | 1 saiti | |
| Tube Sising Mill- ZLY Hard decelerator- Yanki mai girma - Naúrar gwajin sauri - Shugaban kasar Turkiyya - Tsaya daga tsaye | 1 saiti | |
| 6 | Tsarin walda HF mai ƙarfi(XGGP-100-0.4-HC, Tare da iska-ruwa mai sanyaya) | 1 saiti |
| 7 | Gani Mai Yawo Mai zafi/Ciwon Yawo | 1 saiti |
| 8 | Tebur mai ɗaukar nauyi (9m)Juji gefe guda ta hanyar ARC stopper | 1 saiti |
Tsarin hadawa ta atomatik na PVC da tsarin isarwa shine ingantaccen bayani wanda aka tsara don sauƙaƙe da daidaita tsarin hadawa na PVC foda tare da kayan taimako daban-daban.Ta hanyar yin amfani da fasahar ci gaba da ci gaba ta atomatik, tsarin yana bawa masana'antun damar cimma ingantaccen ingancin samfur da inganci.
Daya daga cikin manyan aikace-aikace na PVC foda ne a cikin samar da bututu kayan aiki, profiles, zanen gado, waya sheathing da fim kayayyakin.Don saduwa da ƙayyadaddun buƙatun kowane samfurin, dole ne a ƙara haɗakar da daidaitattun abubuwan ƙari, filastik, stabilizers da sauran kayan taimako.Tsarin isar da haɗaɗɗiyar haɗaɗɗiyar PVC mai sarrafa kansa yana sauƙaƙe wannan tsari ta daidai aunawa da rarraba abubuwan da ake buƙata, tabbatar da ingantattun kayan aiki don ingantaccen aikin samfur.
Hanyoyi masu haɗawa da hannu na al'ada galibi suna fama da sakamako marasa daidaituwa, kuskuren ɗan adam da iyakanceccen kayan aiki.Sabanin haka, tsarin hadawa ta atomatik na PVC da tsarin isarwa ba wai kawai kawar da waɗannan ƙalubale bane, har ma yana haɓaka haɓakar samarwa gabaɗaya.Tare da keɓancewar mai amfani mai amfani da sarrafawa mai hankali, masana'anta na iya saita sigogi cikin sauƙi, saka idanu kan tsari da yin gyare-gyare kamar yadda ake buƙata.Tsarin yana tabbatar da har ma da tarwatsa abubuwan ƙari, rage haɗarin lahani na samfur da haɓaka ƙimar ƙimar gabaɗaya.
Bugu da ƙari, tsarin haɗawa da sarrafa kansa na PVC yana ba da sassauci mara misaltuwa, yana ba masana'antun damar saduwa da ƙayyadaddun samfura da yawa.Tare da saurin canji na iya canzawa, za su iya canzawa ba tare da wata matsala ba tsakanin tsari daban-daban don biyan buƙatun kasuwa masu canzawa.Wannan daidaitawa yana rage raguwar lokaci sosai, yana ƙara ƙarfin samarwa, kuma a ƙarshe yana taimakawa haɓaka gamsuwar abokin ciniki.
Haɗuwa da fasahohin yankan-baki yana tabbatar da daidaiton dosing, amintaccen haɗuwa da ingantaccen jigilar kayan.Ta hanyar amfani da na'urori masu auna firikwensin ci gaba, tsarin yana ba da ra'ayi na ainihi game da kwararar kayan aiki, yana tabbatar da rarraba daidai da rage sharar gida.Tsarin hadawa ta atomatik yana buƙatar sa hannun ɗan adam, rage farashin aiki da inganta amincin wurin aiki.